am335x using linux 3.12

anil kumar23

Hi,

I am starting my development using am335x with Linux 3.12 from sdk7. I have tested in my sdk6 with Linux 3.2 it is working. due to some other issue, i am migrating from sdk6 to sdk7.

I am able to customize my all the drivers with our customized board. when i tried to get the Qt compilation and qt libraries is giving many issues and my application is also very slow when i tried to access data from different resources like USB and from multiple UARTs.

SDK7 have given the default file-system that have all the pvr and sgx graphics libraries are working. How to start my Qt compilation and syncing my application with qt libraries. I want to run my customized Qt apps in my LCD, for that i need to compile the entire Qt with pvr & SGX graphics setup.

Please share the steps how can i get and following the steps to building the whole Qt +SGX.

Regards,

Anil

over 9 years ago

0 Biser Gatchev-XID over 9 years ago

TI__Guru**** 393215 points

Hi,

I will forward this to the SW team.

0 Kemal R. Shakir over 9 years ago in reply to Biser Gatchev-XID

TI__Guru 55345 points

Hello Anil,

Refer to this link and build your app by including the SDK7 setup environment.
processors.wiki.ti.com/.../Sitara_Linux_Training:_Hands_on_with_QT

Follow these steps to rebuild the given default file-system and all its components.
arago-project.org/.../Setting_Up_Build_Environment

Example given:

git clone git://arago-project.org/git/projects/oe-layersetup.git tisdk
cd tisdk
./oe-layertool-setup.sh -f configs/amsdk/amsdk-07.00.00.00-config.txt
export PATH=$HOME/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin:$PATH
MACHINE=am335x-evm bitbake tisdk-rootfs-image

Check this link for quick start.
arago-project.org/.../Setting_Up_Build_Environment

Best regards,
Kemal

Processors

Processors forum

am335x using linux 3.12