u-boot stuck at DRAM: 2 GiB (includes reported below)

Shehzad Ahmed

Hi,

I am using evmk2h and my uboot has stuck at this point . What does that mean and how can i overcome it?

U-Boot 2013.01 (May 28 2015 - 06:53:55)

I2C: ready
SPD csum OK; in SPD: 19 A7; computed 00000019 A7
DDR3A Speed will be configured for 1333 Operation.
Detected SO-DIMM [SQR-SD3T-2G1333SED]
DDR3 speed 1333
DRAM: 2 GiB (includes reported below)

over 10 years ago

0 Raja over 10 years ago

TI__Guru* 81335 points

Hi Shehzad Ahmed,

Are you trying to boot with pre-built MCSDK u-boot image or own built image? I recommend you to program the pre-built image and confirm it. Please download and use the latest MCSDK 3.1.4.7 for development.

Program EVM: http://processors.wiki.ti.com/index.php/Program_EVM_UG

Thank you

0 Shehzad Ahmed over 10 years ago in reply to Raja

Intellectual 260 points

Yes I am using prebuilt binary for u-boot that comes with code composer . The same u-boot.bin works fine on other evmk2h that I had earlier. Both share same revision 4.0. Seem like issue with dram.

0 Raja over 10 years ago in reply to Shehzad Ahmed

TI__Guru* 81335 points

1. Please ensure that the DIMM modules are mounted properly(loose connection).
2. Please replace the DIMM modules and test.

Thank you.

Processors

Processors forum

u-boot stuck at DRAM: 2 GiB (includes reported below)