PIM-SM protocol for IPV6 on Sitarra using Linux 3.12

Tim Potter

Hello,

I am looking for an IPv6 multi-cast routing protocol that I can use on our boards running Linux 3.12. Our boards are using the am335x chip. I see plenty of protocols for ipv4 but I need it for ipv6. Any recommendations?

over 9 years ago

0 Cvetolin Shulev-XID over 9 years ago

TI__Guru 65405 points

Hi Tim,

Check the linked below sources whether they could be implemented and whether could be useful for your environment.

For more details and questions about PIM-SM IPv6 you can contact to listed mailing list at:

BR
Tsvetolin Shulev

0 Tim Potter over 9 years ago in reply to Cvetolin Shulev-XID

Intellectual 726 points

Thanks for the suggestion. I took a look and I see that mrd6 has not been supported since 2005. Unfortunately that won't be an option for me.

Tim

Processors

Processors forum

PIM-SM protocol for IPV6 on Sitarra using Linux 3.12