AM572X DCAN communication with ARM and DSP guide and examples

Daniel Garbanzo Hidalgo

Other Parts Discussed in Thread: AM5728

Hi everyone!

I need to work with the DCAN module on AM5728 evm. I will really appreciate any help or guide related with ARM <--> DCAN and DSP <--> DCAN communication examples.

Thanks!

over 9 years ago

0 Yordan Kovachev over 9 years ago

TI__Guru**** 161600 points

Hi,

Have a look at the following wikis:
processors.wiki.ti.com/.../Processor_SDK_Linux_CAN

Best Regards,
Yordan

0 Daniel Garbanzo Hidalgo over 9 years ago in reply to Yordan Kovachev

Intellectual 510 points

Hi Yordan,

Thanks a lot for the provided information. But, by chance, is there some information directly related with the DCAN modules on AM5728 EVM? Because the wiki links you provided me are for AM335X EVM. I know that provided information is helpful, but I am looking for something more specific and straight to the point.

Also I have another doubt. Does AM5728 has an interface with the DCAN module (example: Expansion Connector or something similar)? How can I interact with the DCAN module on AM5728 EVM ?

Thanks in advance for your help.

Best Regards,

Daniel

0 Yordan Kovachev over 9 years ago in reply to Daniel Garbanzo Hidalgo

TI__Guru**** 161600 points

Hi Daniel,

Daniel Garbanzo Hidalgo said:
Does AM5728 has an interface with the DCAN module (example: Expansion Connector or something similar)? How can I interact with the DCAN module on AM5728 EVM ?

Have a look at the HW user guide for information on which connector pins you can use:
http://processors.wiki.ti.com/index.php/AM572x_General_Purpose_EVM_HW_User_Guide

Daniel Garbanzo Hidalgo said:
But, by chance, is there some information directly related with the DCAN modules on AM5728 EVM?

User space commands should be the same for AM5728 & AM335x, they use similar SDKs.

Best Regards,
Yordan

0 Daniel Garbanzo Hidalgo over 9 years ago in reply to Yordan Kovachev

Intellectual 510 points

Hi Yordan,

Thanks a lot for the information, it was very helpful.

Best Regards,

Daniel

Processors

Processors forum

AM572X DCAN communication with ARM and DSP guide and examples