TMS320C6748: MATLAB SIMULINK With LCDKC6748

Sajad Rather4

Part Number: TMS320C6748

Hello Guys,

Does any one here know how to link CCS v6 with the MATLAB for Simulink interface.

I have already tried it for CCSv3.3 & Matlab 2011,& it works fine with TMS320C6713 Kit but their should be support for latest CCS versions also from both Sides TI as well as MATLAB.But no docs are posted related to that,Kindly let me know the procedure for same ,if it exists.

Thank You

over 8 years ago

0 Yordan Kovachev over 8 years ago

TI__Guru**** 161600 points

Hi,

The links in the last post here:
e2e.ti.com/.../632294
will provide a useful information for your query.

Best Regards,
Yordan

0 Brian McKay over 8 years ago

Mastermind 9005 points

Hi,

Here is the compatibility chart for MathWorks and CCS: http://processors.wiki.ti.com/index.php/MatLab_and_CCS

If you were using the idelink.tlc workflow, it does not have support for CSCv6 (and only partial support for CCSv4 and CCSv5). You will need to migrate to ert.tlc workflow.

---

We used to offer a special C6000 support package, but that too was based on old technology (CCSv3.3) and we discontinued it in Release R2016b.

However you can still use MathWorks tools to design algorithms, and generate C Code - you need to import and integrate the algorithm C code into your CCS project and work from there.

HTH,

-Brian

Processors

Processors forum

TMS320C6748: MATLAB SIMULINK With LCDKC6748