Linux/AM3352: Setting upp eMMC

Part Number: AM3352

Tool/software: Linux

Hi,

We have a custom board based somewhat on Beaglebone Black.

We do not have Ethernet or SD-card reader.

We thought we would use the UniFlash software on Windows 7 in production.

I have followed this to try and program the eMMC. We have all our files ready that will be programmed in to the different partitions, and I have found a flasher.sh script. Everything is setup and I can load u-boot-spl.bin and u-boot-restore.img using USB0 on the AM3352 from UniFlash on Windows 7.

Now I want to have a zImage that can run my flasher.sh script.

But following the guide above, I need a file called sitara_flasher_initramfs_rev_1.0.tar.gz, which I can not find. Can anyone supply it to me? Or point me in the direction so I can get this to work? I have the latest SDK 05.01.00.11.

Thanks in advance!

Regards,
Jonas

Thank you Pavel. I will try this today!

It looks like it is what I need. But if I follow the wiki, and try to use the created zImage to boot, it hangs on "Starting kernel...". And then the board reboots. What could be the issue? The zImage file that is created is almost 7 MByte big. Is it too big for u-boot to unpack?