CCS/TDA2: Run Sample C code on DSP or EVE

Hi Madhav,
Can you provide more information. Are lookin for help in compling the code or linkingiwth your applications etc?

Hello Sir,

I am trying to Run ReLu(as custom layer example) on DSP or EVE or ARM processor.

My ReLu Layer will be expecting Output from one Sub-Network and output to the next Sub-Network running on other core.

Firstly, So i need to know how to run the custom layer which is written in C code on DSP/EVE/ARM core separately, then i ll try to link the subnetworks to my custom layer.

Thanks,
Madhav

Hello sir,

I have compiled c code using TI compiler for EVE target.

when i am trying to run on TDA2x board getting this error file cant able to load.

whether i need to write linker file to configure with memory.

ARP32_EVE_1: Trouble Reading Memory Block at 0x6100 on Page 0 of Length 0x4: (Error -1065 @ 0x6100) Unable to access device memory. Verify that the memory address is in valid memory. If error persists, confirm configuration, power-cycle board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.0.903.2)
ARP32_EVE_1: File Loader: Verification failed: Target failed to read 0x00006100@Program
ARP32_EVE_1: GEL: File: C:\Users\Madhav\workspace_v8\rlu\Debug\rlu.out: Load failed.

Thanks ,
Madhav