WEBENCH® Tools/AM3352: NAND programming tool

Harish Samgir

Part Number: AM3352

Tool/software: WEBENCH® Design Tools

I have one another query.

I am exposing AM335X_StarterWare_02_00_01_01 API but in that using available API I am trying to store ECC data into NAND Flash Spare region but I unable to store data into that region.

If you have sample c code to store data into NAND Flash spare region please share it.

over 6 years ago

0 lding over 6 years ago

TI__Guru* 95265 points

Hi,

The Starterware is obsolete. Please use the Processor SDK RTOS for AM335x. Check http://software-dl.ti.com/processor-sdk-rtos/esd/docs/latest/rtos/index_Foundational_Components.html#boot. There is tool to write an image to AM335x NAND and boot from there.

Regards, Eric

0 Rahul Prabhu over 6 years ago in reply to lding

TI__Guru** 116830 points

Location of NAND Flash writer in Processor SDK RTOS is provided here:

http://software-dl.ti.com/processor-sdk-rtos/esd/docs/latest/rtos/index_Foundational_Components.html#booting-via-nand

If you are trying to run the software on a custom platform then you may need to update the NAND geometry as the NAND page size and spare area is not the same across all the NAND devices available in the market. We recommend trying this on a TI evaluation platform before testing this on your HW so you know how the code is meant to work on a known good platform.

Regards,

Rahul

Processors

Processors forum

WEBENCH® Tools/AM3352: NAND programming tool