Compiler/TDA2EG-17: EDMA on TDA2

user6065254

Intellectual 390 points

Part Number: TDA2EG-17

Tool/software: TI C/C++ Compiler

Hi:

I would like to enable other core to help my system to flip/mirror/rotate image.

1. Is EDMA(mentioned from this post) support those functions?

2. Is there any tutorial about EDMA?

3. Is there any other way to implement those function on other core?

Thank you

over 6 years ago

0 Rishabh Garg over 6 years ago

TI__Guru 55685 points

Hi,

EDMA is a hardware IP and look at TRM for more information.

It does not support these functions by default, you will have to configure it accordingly to achieve the desired functionality.

EDMA can be run from any core.

Hope this helps

Regards,

Rishabh

0 Rishabh Garg over 6 years ago in reply to Rishabh Garg

TI__Guru 55685 points

Hi,

I haven't heard back from you, I'm assuming you were able to resolve your issue.
If not, just post a reply below (or create a new thread if the thread has locked due to time-out).

Regards,
Rishabh

Processors

Processors forum

Compiler/TDA2EG-17: EDMA on TDA2