TDA4VM: How to use XDS110 to flash target MCU ?

Keelung Yang

Part Number: TDA4VM
Other Parts Discussed in Thread: TMDSEMU110-U, J721EXCPXEVM

Hi,

We bought TMDSEMU110-U, and I know there is a on-board XDS110 in J721EXCPXEVM.

Now we want to use XDS110 (on-board or usb box) to flash MCU in TDA4.

But I checked XDS110's latest user guide and CCS Setup for J721E in PSDKR v7.2, there is no such document talking about flashing target MCU.

over 5 years ago

0 Karan Saxena over 5 years ago

TI__Guru* 78125 points

Hi Keelung Yang,

You can take a look at the documentation here - https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/07_02_00_06/exports/docs/psdk_rtos/docs/user_guide/ccs_setup_j721e.html

This describes how setup CCS for XSD110 on board debugger.

Regards,

Karan

0 Keelung Yang over 5 years ago in reply to Karan Saxena

Expert 1796 points

Hi Karan,

Your url is for how to setup, but what I want is how to flash as in this thread's title and context.

0 Karan Saxena over 5 years ago in reply to Keelung Yang

TI__Guru* 78125 points

Hi Keelung Yang,

If by flashing you mean loading the application on MCU R5 from CCS then please take a look at the video attached in the response - https://e2e.ti.com/support/processors/f/processors-forum/979285/tda4vm-how-to-run-can_profile_app-using-ccs9-3/3631694#3631694

Let me know if this helps or if the intent is to do something else.

Regards,

Karan

0 Keelung Yang over 5 years ago in reply to Karan Saxena

Expert 1796 points

Hi Karan,

Thanks for your information. Can I and how to flash memory used by CPU in main domain?

+1 Karan Saxena over 5 years ago in reply to Keelung Yang

TI__Guru* 78125 points

Hi.

The process is similar to what was there in the video for the MCU R5, the only difference will be that the core which you want to connect to. Let me know of you face any problem.

Regards,

Karan

Processors

Processors forum

TDA4VM: How to use XDS110 to flash target MCU ?