DRA718: Switch_CLKOUTMUX0_CLK is always in open state when using clock tree tools to configure clkout3

user5104111

Part Number: DRA718

Hi:

I want clkout3 to output some frequency ,but I am using clock tree tools to configure clkout3 ,Switch_CLKOUTMUX0_CLK is always in open state .

I have enabled timer5 and select CLKOUTMUX0_CLK as the source clock of timer5 ，please help me.

thank you

regards

over 8 years ago

0 Alex Bashkov over 8 years ago

TI__Genius 14190 points

Hello,

Looks like a bug, please replace this file:

CTT-Automotive-v1.0.0.4\XMLFiles\DRA71x\XMLFiles_DRA71x_SR2.1_SR2.0\model_DRA71x_SR2.1_SR2.0.xml with this model_DRA71x_SR2.1_SR2.0.xml

Make sure you have enabled TIMER5, MUX_TIMER5_GFLCK also needs to be configured with input CLKOUTMUX0_CLK. Make also sure you have running clock input to the MUX_CLKOUTMUX0_CLK.

Let me know if now works for you. If so, we will make sure CTT is updated accordingly in the upcoming version.

thanks

Alex

0 user5104111 over 8 years ago in reply to Alex Bashkov

Intellectual 290 points

Hi Alex:
After I replace model_DRA71x_SR2.1_SR2.0.xml ，it works fine!!!
thank you very much!!
regards

Processors

Processors forum

DRA718: Switch_CLKOUTMUX0_CLK is always in open state when using clock tree tools to configure clkout3