Sitara & DSP "How to Videos"

Sitara & DSP "How to Videos" are usually focused on particular interesting topics. The goal is to provide you a quick overview on particular topics to help you understand it quickly. It is short and sweet. You can probably find these "How to Videos" under product folders or application notes, but for your convenience, I am listing all the "How to Videos" that we currently have. Please note it is not an exclusive list as we keep developing the videos. You are always welcome to come back and take a look at it again.

Sitara General

• How to Boot to Shell on Sitara AM-Class Devices

• Demonstrating Time Sensitive Networking (TSN) on Sitara Processors

• Demonstrating the Sitara LVDS Video Interface Reference Design

Sitara AM6x

• Sitara AM65x Processors: Your Industry 4.0 Solution

• AM65x Sitara GP EVM Board Tour

• AM65x Sitara IDK Board Tour

Sitara AM57x

• How to Use AM57x/DRA7x DFU Boot Mode with Linux Host

• Bringing Up the AM57x Industrial Development Kit (IDK) LCD on the AM5718/AM5728 IDK EVM

• Building and Running Inter-Processor Communication (IPC) Examples on the AM572x GP EVM

• Enabling PCI EP Mode on AM57x using Processor SDK Linux

Sitara AM335x

• Demonstrating Manual Power Measurements on the AM335x GP EVM using Shunt Resistors

• Demonstrate the AM335x GPEVM DCAN Board-to-board Example from Processor SDK RTOS

Industrial

• How to Choose a Sitara Processor for Industrial Communications

• Demonstrating the Jailhouse Hypervisor Virtualization on the Sitara AM572x Reference Design

• Enabling PCIe in Jailhouse Root Cell on AM5728 IDK

• Demonstrating the CC-Link IE Field Basic Master and Slave Reference Design with Processor SDK RTOS

• Demonstrating Simple Open Real-Time Ethernet Protocol (SORTE) Master and Slave on PRU-ICSS using Processor SDK RTOS

• Demonstrating the CC-Link IE Field Basic Master and Slave Reference Design with Processor SDK Linux

• Demonstrating EtherCAT Master on Sitara AM57x Gb Ethernet and PRU-ICSS with Time-Triggered Send

PRU-ICSS

• PRU-ICSS: Interfacing a Processor with Multiple ADCs

• Rebuilding PRU Firmwares on Target using Sitara Processors

OMAP-L13x

• Restoring and Updating U-boot NAND on OMAP-L138

• Demonstrating Voice Preprocessing on the OMAP-L137/TMS320C6747 Floating Point Starter Kit

 AMIC11x

• Demonstrating DDR-less EtherCAT Slave on AMIC110

• Demonstrating DDR-less EtherCAT Slave on AMIC110 with C2000 EtherCAT Master

C66x

• Restoring Factory Default Images on KeyStone II Platforms

K2G

• Demonstrating U-Boot from SPI/QPSI on 66AK2G

• Demonstrating Voice Preprocessing on the EVMK2G

C55x

• Demonstrating Voice Preprocessing on the C5517 EVM

• Demonstrating Voice Triggering and Processing with Cloud Connection to IBM Watson

TI-RTOS

• Demonstrating I2C Firmware Examples in Processor SDK RTOS

• How to Run Processor SDK RTOS Board Diagnostics Using SPI Flash

• How to Run Processor SDK RTOS Board Diagnostics Using SD Card

• Getting Started with the Audio Benchmark Starterkit

• Testing Device Drivers using Processor SDK RTOS

LINUX

• Using Linux Ethtool and U-Boot MII Tools to Examine Ethernet Link Status

• How to Enable a USB Device Driver in Processor SDK Linux

• Profiling Suspend/Resume Latency of the Linux Kernel on Embedded Processors

• Dos and Don'ts for Communicating Issues & Queries to the Linux E2E Community Forums