Linux: I want know how to inegrate UBIFS + NAND drivers + FLash Boot Loader in Linux

Harish Gangadhar

Tool/software: Linux

I wanted to know how UBIFS can be used for NAND S34ML01G2. How do I work with UBIFS on this NAND. Any pointers will be helpful.

over 7 years ago

0 Biser Gatchev-XID over 7 years ago

TI__Guru**** 393215 points

What processor are you using?

0 Harish Gangadhar over 7 years ago in reply to Biser Gatchev-XID

Expert 1600 points

ARM Cortex

0 Biser Gatchev-XID over 6 years ago in reply to Harish Gangadhar

TI__Guru**** 393215 points

Harish Gangadhar said:
ARM Cortex

Harish,

Could you be more specific? Please post the Texas Instrument processor part number and Linux version you use. This forum is dedicated to supporting TI devices. This forum does not support generic Linux discussions. Unless you provide more details on your use case we will not be able to help you better.

0 Harish Gangadhar over 6 years ago in reply to Biser Gatchev-XID

Expert 1600 points

we are using TI NOR and NAND with ARM Cortex. What I mean is that we are trying for a NOR+ NAND solution for which we need to build UBIFS image and work with it. Kindly help to throw some light or pointers on this.

0 Harish Gangadhar over 6 years ago in reply to Harish Gangadhar

Expert 1600 points

Linux version is 3.14 and TI Flash devices are not yet identified. I mean management is still working on this. We are doing analysis on this. I hope this answers ur question.

0 Biser Gatchev-XID over 6 years ago in reply to Harish Gangadhar

TI__Guru**** 393215 points

I believe this has been answered by Kemal here: e2e.ti.com/.../2840274

Please note that Linux v3.14 is obsolete and no longer supported by TI. When you finalize your processor choice you should move to the new Processor SDK: www.ti.com/.../processor-sw.html

Processors

Processors forum

Linux: I want know how to inegrate UBIFS + NAND drivers + FLash Boot Loader in Linux