This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

Linux/AM3358: HDMI splash screen in U-boot

Prodigy 80 points

Replies: 4

Views: 232

Part Number: AM3358

Tool/software: Linux

I'm attempting something very similar to (https://e2e.ti.com/support/processors/f/791/t/782759?tisearch=e2e-quicksearch&keymatch=am335x%20splash). I'm using a BeagleBoneBlack and attempting to output a splash screen to connected HDMI screen. I find quite a bit on splash images for LCD, but can't find any solid information on how to setup/utilize the HDMI port. Is it not possible to initialize and drive the necessary chips, or am I just overlooking something. Thank you for any info!

  • Hello,

    As you mentioned in the post, most of the examples are based on LCD and as of now, we do not have any examples for HDMI.

    Regards,
    Krunal 

  • In reply to Krunal Bhargav34:

    Thank you for the response. Any related threads or documentation that may be of assistance in this area?

  • In reply to Gary Simmons:

    Hello,

    Unfortunately, splash screen is not officially supported by PSDK and we do not have any latest document demonstrating splash screen example.

    Regards,
    Krunal 

  • In reply to Krunal Bhargav34:

    That's unfortunate. Thank you for the response nonetheless.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.