• State Answer Suggested
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 97 subscribers
  • Views 1579 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DM385: AR0330 DCC Tunning RGB2RGB module.

RAJ.M
Expert 2440 points

Part Number: DM385

Hello All,

We are using DM385 + AR0330 custom board with IPNC 3.5 rdk.

We want to do Color Correction. so we took  RGB2RGB module in DCC tool. We are created dcc_default.bin its applying when board boot up. how RGB2RGB module Matrix effect in IPIPE for different light setup likelow light, sunny. DCC tool document not having enough information to proceed.

Can we get training for DCC tunning tool?

Regards,

RAJ M

  • 0
    TI__Guru* 80190 points
    Hello,

    I will notify the IPNC team for help.
    Meanwhile you could search in the e2e for similar question.

    BR
    Margarita
  • 0
    Prodigy 60 points

    Hi Raj,

    dcc_update function called in issdrv_alg2AApi.c file, parses the content of dcc_default.bin and select the configurations based on current lighting condition. This function is called periodically. The lighting condition is determined by three parameters, estimated color temperature, exposure time, and sensor gain.

    DCC tool supports creating different set of configurations for a module based on above three parameters. Please refer tuning tool user guide where they explain about creating multiple settings for IPIPE noise filter.

    Best Regards

    Nithin Varghese

  • 0 in reply to Nithin Varghese
    Expert 2440 points
    Hi Nithin Varghese,

    Thanks for your reply,

    We followed tuning tool user guide. but not much information for module based on color temperature, exposure time, and sensor gain parameters.

    Can you explain in snapshot for the above feature tunning ?

    Thanks in advance,
    RAJ M
  • 0 in reply to RAJ.M
    Prodigy 60 points
    Hi Raj,

    Please refer the following sections in DCC_UserGuide.pdf document.

    1) 3.7.3 Use case/Photo spaces tab
    2) 3.7.4 Photospace regions
    3) APPENDIX B -Defining Photo Space regions with an Example

    Best Regards
    Nithin Varghese
  • 0 in reply to Nithin Varghese
    Expert 2440 points

    Hi ,

    We are working different RAW sensor on DM385 platform. We want some training on RAW sensor tunning. where can we get some training (or workshop) on RAW sensor tunning with respect to DM385 platform.

    How to use dcc tool for each modeule (video demo)?


    Regards,
    RAJ M

  • 0 in reply to RAJ.M
    Expert 2440 points
    Hi,

    Any update?

    Regards
    RAJ M