• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 640 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA3: Radar Processing Data Flow

KenF
Expert 7150 points
Part Number: TDA3


Hi Experts,

 

My customer is looking at EVE_Applets_UserGuide.pdf from Radar SDK 3.1. The description on page 160 or later is for TDM-MIMO? Or is it valid for both TDM-MIMO and BPM-MIMO?

 

Best regards,

Ken

  • 0
    TI__Guru 56820 points
    Hi Ken,
    FFT processing is same for both the cases. The difference would be for BPM-MIMO case we will need to enable tx decoding before finding the peaks. This feature ( tx decoding) is already supported in Peak detection applet.

    Regards,
    Anshu