Analog Down Converter IC

Hi Shyam,

I will have someone look into this for you and respond as soon as I know.

Regards,

Rob

From Analog i can see few mixers like AD831 and AD835, do you have any equivalent ?

Mini Circuits has ADE-6+ do you have any equivalent ?

Basically a double balanced mixer can do this job from my priliminary study, experts can throw their opinion

Hi Shyam, another option is to directly sample the 200MHz input, however resolving an 8kHz tone may be challenging. If you think about this route, a few of the ADC suggestions we have at these speeds would be ADC3244 or ADC3664. If you decide to go the down converter IC route, our precision ADC group has many different ADC options. https://www.ti.com/data-converters/adc-circuit/precision-adcs/overview.html 

Thanks

Precision ADCs Input frequency is limited to 10MHZ, your suggested ADCs are only 125MSPS and not suitable

I did not get the idea you explained , i already have the plan to use a High speed ADC (AD5407 with DDC in FPGA)

I am searching for low cost solution if TI has any

Kindly go through my requirement again, i wish to extract the signal which is arround beat frequency arround 200MHZ, this would require a high cost high speed ADC of 500MSPS

to reduce cost i am asking for a solution for work arround using a Mixer.

Shyam,

The ADS5407 is a good choice for this but is more expensive, as you noted. The input bandwidth on the other ADC suggestions are beyond 200MHz, so they both would work if undersampling is acceptable. I suggested the precision ADC group for parts if you choose to go the analog mixer approach. Sorry for the confusion. 

My requirement is not ADC, my requirment is Analog Mixer solution from TI

Kindly comment on that , please see my question again.

I am looking for mixer solution.