• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 11 subscribers
  • Views 347 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE7444EVM: AFE74xx configuration problem

Deng Jingyu
Prodigy 130 points
Part Number: AFE7444EVM


Hi,

According to the steps of the document named AFE74xxEVM User's Guide, I configure AFE744EVM through the software AFE74XX.

When I complete the configuration in the Quick start interface, click set mode and run the complete startup sequence, and the sequence status at the bottom of the page is still all gray.

  • 0
    TI__Mastermind 18011 points

    Hi Deng,

    The sequence status at the bottom of the page does not currently work at the moment. After programming the AFE they will stay gray. Please continue to follow the AFE74xxEVM User's Guide and you should be able to configure the AFE into mode 4. 

    Regards,

    David Chaparro