• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 11 subscribers
  • Views 500 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Low -Noise Amplifuer speific for MRI Design

solasubbu S
Prodigy 20 points


TL5500RGPT-Precision Amplifiers Low Noise Pre-Amp

Can you please inform us when this series amplifier will come out for sale.

Or it is discontinued?

Do you Have an Alternate. Please suggest us for MRI application.

Mail Id   solasubbu@khmdl.com

  • 0
    TI__Genius 13965 points

    Hi Solasubbu,

    I can't find any reference to that specific amplifier, so we can't give any further information.  We have many low-noise amplifiers but there isn't enough information for us to select specific devices here.

    For information on MRI design and component selection, please see the following web page.

    https://www.ti.com/solution/mri

    Depending on if the amplifier is in the transmit or receive blocks, there are different suggestions, an example seen below:

    Hopefully this helps, let me know if anything else is needed.

    Regards,
    Mike