Trigger AFE8092IABJ Alarm(interrupt) output via access some register

Lee

Hello:

We are using 'AFE8092IABJ' in our project, may I ask how to trigger Alarm(interrupt) output in most simple way? For example configure some register, we use GPIO_P5 as interrupt output.

Thanks for your support in advanced!

Br. Li

over 2 years ago

0 Kang Hsia over 2 years ago

TI__Guru* 77964 points

Hi Li,

Most of the time Alarm and Interrupt are triggered by power amp protection and JESD204 alarms. This can be configured through C API. If you have access to our AFE80xx configuration guide, the guide have extensive overview on the trigger mechanism. You may request access here:

https://www.ti.com/product/AFE8030

0 Lee over 2 years ago in reply to Kang Hsia

Prodigy 140 points

Hello Kang:

Many thanks for your reply! I will try to request access for related info.

Br. Li

RF & microwave

RF & microwave forum

Trigger AFE8092IABJ Alarm(interrupt) output via access some register