• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 10 subscribers
  • Views 345 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AFE7950EVM: TSW14J57EVM+AFE7950EVM: Applicatiom Software Development

AFE7950EVM: TSW14J57EVM+AFE7950EVM

Archana Gupta
Prodigy 10 points
Part Number: AFE7950EVM
Other Parts Discussed in Thread: TSW14J57EVM

We are trying to load new .sof file through FPGA JTAG (usb II blaster), and in the console window it shows programmed successfully but in the signal tap it says program the device to continue. We are facing this issue after clean the project and added the signal tap to the project file multiple times but still it shows the error in signal tap analyser. Attaching the screenshot below for your reference.

  • 0
    TI__Genius 10865 points

    Hi Archana,

    TSW14J57EVM firmware was developed by a 3rd party company that’s no longer with TI. Unfortunately, we don’t have TI developed firmware to help with issues on firmware development.

    You may check with Intel for help on this as this issue is in Intel development environment. You may need to use the Arria 10 development kit instead of TSW14J57. The TSW14J57 is meant to be used with TI firmware only. It's not made for custom firmware development. 

    Regards,

    Vijay