This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Andrii,
Thank you for your patience. I attached the Deembedded data for AFE7769D which is pin to pin compatible with AFE7769.
For the RF matching for each band, the customer will need to follow the following methodology:
1) Use the available de-embedded s-parameter measurements for our RX/TX/FB input/output equivalent impedance for their RF matching simulation
2) Follow our balun recommendations on the AFE7769D EVM with different RF band flavor as initial guidance. Please check the attached files below.
Thanks,
Serkan
Hi Andrii,
Thank you for your inquiry. May I ask more about the SDR project as a whole?
Best regards,
Simran
Hi Simran,
We are going to use this chip in our measurement equipment and in small private 3G/4G BaseStation.
Regards,
Andrii