AFE7900EVM: PCB STACKUP Required

VISHRUT DAVE

Part Number: AFE7900EVM
Other Parts Discussed in Thread: AFE7900

Hi,

Can anyone please provide PCB stack-up for AFE7900EVM?? The reason I'm asking is because I see 3 different trace widths between input SMA connector and AFE7900 pins. There must be a good reason for this so just want to check for the same in stack-up. Thanks.

over 2 years ago

0 Camilo Garcia Trujillo over 2 years ago

TI__Expert 5185 points

Hi Vishrut,

Please see the "AFE7900 stackup.pdf" file inside the "AFE7900EVM_DesignFiles" zip folder in the secure folder under EVM design files.

Best,

Camilo

0 VISHRUT DAVE over 2 years ago in reply to Camilo Garcia Trujillo

Prodigy 40 points

I have requested the design files but I would appreciate it if I can get that file in here only.... Thanks...

0 Camilo Garcia Trujillo over 2 years ago in reply to VISHRUT DAVE

TI__Expert 5185 points

Hi Vishrut,

All the files related to the AFE7900 must go through our secure folder. Could you please request access by filling out the form in the link below?

https://www.ti.com/licreg/docs/swlicexportcontrol.tsp?form_id=318147&prod_no=AFE79XX-HSC-DESIGN&ref_url=ASC_DC_DC-HSC

Then you will be granted access and you will be able to download the file.

Best,

Camilo

0 Camilo Garcia Trujillo over 2 years ago in reply to Camilo Garcia Trujillo

TI__Expert 5185 points

Hi Vishrut,

Were you able to find the "AFE7900 stackup.pdf" file inside the "AFE7900EVM_DesignFiles" zip folder in the secure folder under EVM design files. You should have access to it through the link below:

https://www.ti.com/securesoftware/docs/autopagepreview.tsp?opnId=24949

If there are any other issues please let me know.

Best,

Camilo

RF & microwave

RF & microwave forum

AFE7900EVM: PCB STACKUP Required