This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hello,
The simulation tool we use is ADS.
1. Should we need to add a separated component in front of RX AMI model?
2. If needed, what is the separated component?
Best regards,
Avihay.
Hi Avihay,
For the RX model you will need to add a termination like in the image below as per the readme.
And make sure to add the S parameters for anything that your signal passes through, including the S4P provided with the model.
Best,
Camilo