• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 12 subscribers
  • Views 202 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE7950EVM：AFE7950EVW & TSW14J58EVW

?? ?
Prodigy 10 points
Part Number: AFE7950EVM
Other Parts Discussed in Thread: TSW14J58EVM, , AFE7950

Tool/software:

Hello

         I am currently using the AFE79xx GUI software in conjunction with the AFE7950EVM evaluation board and the TSW14J58EVM for my experiments. During the process of running the setup script, I encountered the following error message:

#Executing .. AFE7950/bringup/setup.py

#Start Time 2024-11-17 18:47:32.124000

#Error: 'ascii' codec can't decode byte 0xb0 in position 6: ordinal not in range(128)

I have tried running the setup on several different computers, but the result remains the same. Could you please advise on how to resolve this issue?

  • 0
    TI__Genius 15621 points

    Hi,

    This is not an error we have seen before so we are checking internally with our software team.

    One thing that can be tested while we check on this is to uninstall the GUI software, including deleting the folder in both the documents and programs folder, then reinstall the software.  Can you try this on your side?

    Regards,

    David 

  • 0 in reply to David Chaparro
    TI__Genius 15621 points

    Hi,

    One other thing that could cause an issue like this is the system character encoding. In the AFE79xx GUI software can you enter the following 'sys.stdin.encoding' in the command line and report what is printed in the log window? 

    Regards,

    David