AFE7769D: CAPI for DPD, CFR, and PAP

Peggy

Part Number: AFE7769D

Tool/software:

I would like to enable the DPD, CFR, and PAP functionalities of the AFE7769D using the provided CAPI interface.
If there are any example scripts, CAPI call sequences, or internal documents available for customer reference, they would be extremely helpful.

1 month ago

0 Simran Nanda 1 month ago

TI__Intellectual 2506 points

Hello,

Thank you for your inquiry. For DPD, CFR, and PAP in general, our team recommends to refer to the "AFE77xxD Configuration Guide", which is available by requesting access through the following link: https://www.ti.com/drr/opn/AFE7769D-DESIGN

For DPD more specifically, we have a 3-part video series available (the third video highlights DPD though the first and second videos are strongly recommended to review): https://www.ti.com/video/series/AFE77xxD-latte-series.html

Please let me know if you have further questions. Thank you!

BR,

Simran

0 Peggy 1 month ago in reply to Simran Nanda

Prodigy 110 points

I have already downloaded and read the relevant documents.
I would like to ask how to perform the device bring-up process using AFECLibs.
and could you please tell me how to generate the parameters for use with the AFECLibs library using the GUI tool (TI AFE77xxD Evaluation Tool)?

0 Simran Nanda 1 month ago in reply to Peggy

TI__Intellectual 2506 points

Hi Air,

The device bring-up process is outlined in the AFE77xxD Latte video series: the first two videos walk you through the actual device bring-up process. Please refer to the below

https://www.ti.com/video/series/AFE77xxD-latte-series.html

BR,

Simran

RF & microwave

RF & microwave forum

AFE7769D: CAPI for DPD, CFR, and PAP