• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 11 subscribers
  • Views 432 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

cmd5016 source code

Bjoern19538
Prodigy 30 points

We are implementing a GC5016 Design with variable configuration ( Variable FIR Coeffs, NCO Frequency, AGC...). The configuration is

of the GC5016 is controlled by a uC.

So it would be very useful if we can see the cmd5016 source code to determine how the registers are calculated.

 

Best regards

  • 0
    TI__Mastermind 37500 points

    Hello Bjoern,

    The GC5016 source code is only available under a special license agreement, please contact your local TI Field Application Engineer.

    Most customers have implemented embedded applications by presetting a set of conditions, and storing the configurations.  In the case of DDC output gain, frequency, the register updates and synchronization are explained in the datasheet.   

    The output from cmd5016 .tbl indicates all of the register variable values used in configuration.  The .gc101, and .h files can be used for embedded applications, as these have all of the register programming.

    Regards,

    Radio Joe