DAC38RF83: Required S-param model

Dmitry Baikov

Prodigy 120 points

Part Number: DAC38RF83

Hello,

Can you send the simulation model (S-param) for DAC38RF83?

Best Regards,
Dmitry

over 5 years ago

0 Kang Hsia over 5 years ago

TI__Guru* 78874 points

Hi Dmitry,

We have IBIS models with measured equivalent resistance and package capacitance available. You may download it from TI web:

-Kang

0 Dmitry Baikov over 5 years ago in reply to Kang Hsia

Prodigy 120 points

Hi Kang,

But that is not what I need.
I need an S-param model for the analog output VOUT+/- and VOUT2+/-.
In the IBIS model these pins marked as "nc".

Best Regards,
Dmitry.

0 Kang Hsia over 5 years ago in reply to Dmitry Baikov

TI__Guru* 78874 points

Hi Dmitry,

Understood. I will ask one of our team members to look into this.

Please expect delay during the US holiday season.

-Kang

0 Ebenezer Dwobeng over 5 years ago in reply to Dmitry Baikov

TI__Genius 9695 points

Hi Dmitry,

The sparameter file and an example testbench can be downloaded from here:

Thanks,

Eben.

RF & microwave

RF & microwave forum

DAC38RF83: Required S-param model