AWR2243BOOST: PMIC settings

KenF

Part Number: AWR2243BOOST

Hi Experts,

Per AWR2243BOOST schematics, LP87524J is used. Are the default settings used (i.e. just power on without I2C writes to the PMIC registers)?

Best regards,
Ken

over 4 years ago

0 Cesar over 4 years ago

TI__Guru*** 147854 points

Hi,

The HW team will review your question and get back to you

thank you
Cesar

+1 aozer over 4 years ago

TI__Mastermind 29755 points

Hello,

Yes, if you use the same part number as used on the EVM (LP87524JRNFRQ1) the OTP settings will configure the bucks for the settings used on the EVM by default.

Regards,

Adrian

Sensors

Sensors forum

AWR2243BOOST: PMIC settings