• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 512 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR2243: CSI2 requirements

KenF
Expert 7150 points
Part Number: AWR2243

Hi Experts,

My customer is building cascade radar board with AWR2243 by themselves. To select CSI2 receiver IP, please let us know following feature is needed or not.

- Turn Around
- ULPS
- LPDT tx/rx
- Trigger mode

Also, Let me know following information.
- Type of ShortPacket to use
- Type of LongPacket to use

Best regards,
Ken

  • 0
    TI__Guru*** 148974 points

    Hi,

    The HW team will review your question and get back to you

    Thank you

    Cesar

  • +1
    TI__Guru 58035 points

    Hello Ken,

    we don support ULPS mode. So only HS receiver and LP mode receiver is needed. I believe turn around is for a duplex communication, we support transmitter only, hence only simplex data transfer.  I am not sure what trigger mode is.

    We use the short packet as defined in the MIPI protocol, there is no difference. We have the frame start/ end , line start/end packets. The long packet is used for sending the radar data.

    Regards,
    Vivek