IWR6843ISK-ODS: Replacement RF-Entwicklungstools

Sandra Morgenbrod

Part Number: IWR6843ISK-ODS

we have ordered the above-mentioned item at Mouser.
After thr delivery we found that the device "RF development tools IWR6843ISK ODS REVISION Mouser No.:595-IWR6843ISK-ODS" has the following defect:
The device has scratches on one side and a kind of abrasion / erosion on the other (pictures in the appendix).
Above all, the "abrasion / erosion" traces in picture_2 can be bad, as this is right next to / on the radar antennas.
We want to send the item back an get a replacement delivery

Please let as know how to proceed in this case.
<edited my moderator on Jun 14th 20211>

over 4 years ago

0 Vaibhav Mahimkar over 4 years ago

TI__Mastermind 23725 points

Hello

Sorry to know that there were scratches on the board.

We do not think it would affect the performance of the board in any way.

Thank you,

Vaibhav

0 Ishita Kochar over 4 years ago

TI__Mastermind 31680 points

Hello,

It is perfectly normal to see some rust/scratching on the surrounding surface of the antenna. This is due to the immersion silver finish, it is purely cosmetic and will not affect the performance of the antenna as Vaibhav said.

Regards,

Adrian

Sensors

Sensors forum

IWR6843ISK-ODS: Replacement RF-Entwicklungstools