IWR1443BOOST: I want to get sensing data in realtime(not used mmWave-studio)

Kim JaeWook

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443, MMWAVE-SDK, SYSBIOS, CCSTUDIO

Hi I'm Kim

I want to get sensing data in realtime(not used mmWave studio)

1. As I know, mmwave demo visualizer can get sensing data in real time.

1) please let me know document that include that information / Can I revise data processing flow in mmwave demo visualizer?

2) I also heard about mmwave SDK. / What is the mmWave SDK and Can I get sensing data by using mmWave SDK?

2. I heard that IWR1443 support UART communication

1) How can i read about IWR1443's UART rule?

I appreciate your effort

Kim

over 4 years ago

0 Akash Gondalia over 4 years ago

TI__Guru 50240 points

Hi Kim

mmWave-SDK is used for software development and debug using TI mmWave Sensors. For IWR1443 device you will want to download mmWave-SDK 2.1.

The rest of these are covered in the SDK doxygen, which is located in the SDK at the following location: <mmWave_SDK_Installation_Path>\packages\ti\demo\<Device Name>\mmw\docs\doxygen\html\index.html

Regards,

0 Kim JaeWook over 4 years ago in reply to Akash Gondalia

Prodigy 140 points

I saw it on the path you said.
There are a lot of C files.
Is it common to create a real-time sensing system to develop through these c files?
If someone want to use MALTAB, Should users develop a matlab language separately?

0 Kim JaeWook over 4 years ago in reply to Kim JaeWook

Prodigy 140 points

plus, I detect header file #include <xdc/sysbios/knl/Task.h> in main.c
As i know, It is not general form.
To develop realtime sensor, should i prepare other software?

+1 Akash Gondalia over 4 years ago in reply to Kim JaeWook

TI__Guru 50240 points

Hi Kim

You will need to use CCSTUDIO to develop with mmWave-SDK. Please see the Out of Box Demo for more details.

Regards,

Sensors

Sensors forum

IWR1443BOOST: I want to get sensing data in realtime(not used mmWave-studio)