• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 278 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843ISK: Check which .bin file was flashed onto sensor

Izzul Fauzy
Prodigy 20 points
Part Number: IWR6843ISK
Other Parts Discussed in Thread: IWR6843

Hi,

I have an IWR6843 mmwave sensor with me.

May I know is it possible to check which .bin file was flashed onto the sensor?

For example if I would like to find out of the sensor was flashed with the Out of the Box Demo firmware or the Long Range People Detection Firmware.

Thank you for your time.

Best regards,

Izzul

  • +1
    TI__Genius 14415 points

    Hello Izzul,

    Do you mean you need to know what comes loaded out of the box? Or which was the last .bin flashed? Can you reflash the device with the desired FW?

    Otherwise, you can make modifications to the CLI output message to print the name of the demo that is loaded on power on. There isn't an easy way to do this with the existing software.

    Regards,

    Jackson