AWR2243: ADC Dynamic Range of AWR2243

Gerald

Part Number: AWR2243

Hi Team,

May I ask for help? My customer concern is as shown below:
"Data sheet for AWR2243 does not show ADC Dynamic Range.
It would be great if ADC could tell us the range of operation.
Could I use ADC from 0 to 1.8V?"

I hope you can help us with this.

Thank you so much.

Gerald

over 4 years ago

0 Cesar over 4 years ago

TI__Guru*** 148224 points

Hi,

The HW team will review your question and get back to you

thank you

cesar

+1 Ishita Kochar over 4 years ago in reply to Cesar

TI__Mastermind 31680 points

Hello Gerald,

You can refer to Section 6.4.1 of the following datasheet for details on ADC : AWR1843 Single-Chip 77- to 79-GHz FMCW Radar Sensor datasheet (Rev. B) (ti.com)

This is applicable for AWR2243 as well.

I apologize for the inconvenience caused because of this and will take action to include this section in the next revision update for AWR2243 Datasheet.

Regards,

Ishita

Sensors

Sensors forum

AWR2243: ADC Dynamic Range of AWR2243