LMT01-Q1: LMT01QLPGQ1

MARI SELVAM MURUGESAN

Part Number: LMT01-Q1
Other Parts Discussed in Thread: LMT01

We need your support regarding the Temperature Sensor Part "LMT01QLPGQ1".

Is there any Test Methodology available for this Sensor Part, there by we have to confirm its Proper Function in our end, after developed our product using this sensor part.

over 3 years ago

0 Jesse Baker over 3 years ago

TI__Expert 7495 points

Hi Mari,

Thanks for posting to the Sensors forum.

To test that the LMT01 is operating properly in your design, refer to Section 8.2 of the LMT01 Datasheet for typical applications.

Setting up the LMT01 with a pulldown resistor and monitoring the output with an oscilloscope should allow you to see the output pulse train that corresponds to the temperature.

Best regards,

Jesse

0 MARI SELVAM MURUGESAN over 3 years ago in reply to Jesse Baker

Prodigy 50 points

Hi Jesse,

Thanks for your timely support.

Regards,

Mari Selvam