AWR2243: clientCtx.ackTimeout question

KenF

Part Number: AWR2243

Hello Jitendra,

You answered clientCtx.ackTimeout needs to be set.
(1) Does it mean SDK needs the timeout? Or does device itself have restriction of IRQ response time?

(2) Please let us know how to do that. We don't use mmWaveSDK for MMIC control but implement SW based on mmWave-Radar-Interface-Control.

Best regards,
Ken

over 4 years ago

0 Cesar over 4 years ago

TI__Guru*** 149044 points

HI,

Please give us some time to review this question

thank you
Cesar

0 KenF over 4 years ago in reply to Cesar

TI__Expert 7150 points

Hi Cesar,

Can you please follow up on this?

Best regards,
Ken

+1 Jitendra Gupta over 4 years ago

TI__Guru 69960 points

Hi Ken,

clientCtx.ackTimeout is used by mmwavelink, which will instruct it to wait for this time for response from the AWR device (after it sends command to it).

ackTimeout value is being passes to rlOsiSemWait callback function where this semaphore function will wait for semaphore signal else return at timeout.

This semaphore is signalled when Device raises HostIRQ to send response for that command.

Sensors

Sensors forum

AWR2243: clientCtx.ackTimeout question