AWR1843BOOST: Port Lab4 from awr1642 to AWR1843

Wajih Youssef

Part Number: AWR1843BOOST
Other Parts Discussed in Thread: AWR1642, AWR1843,

Hi everyone,

Any idea on how can I port the Lab4 from AWR1642 to AWR1843, the goal is to enable all AWR1843 features ( 3 Tx antennas ... ) ?

Is it possible to run a complex cfg file ( for example to embed 2 sub-frames ) into the lab4 cfg file ?

over 4 years ago

+1 Cesar over 4 years ago

TI__Guru*** 148714 points

Hi,

Instead of trying to port the lab4 from AWR1642 to AWR1843 I think you should just run the mmWave SDK demo on AWR1843BOOST EVM. This demo will also support multi frame configuration.

There is no significant difference in performance between the two processing chains.

Thank you

Cesar

0 Wajih Youssef over 4 years ago in reply to Cesar

Intellectual 535 points

Hi Cesar thanks for your reply,

can you please specify which demo exactly ( its path) ?

thanks

+1 Cesar over 4 years ago in reply to Wajih Youssef

TI__Guru*** 148714 points

The demo provided with the mmWave SDK.

In your other post you are asking how to create a CCS project for it

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1019925/awr1843boost-how-to-create-a-project-from-sdk-demo

Thank you

Cesar

Sensors

Sensors forum

AWR1843BOOST: Port Lab4 from awr1642 to AWR1843