• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 266 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR6843AOP: About changing config file using 3D people counting demo

CHEN SHAO
Prodigy 65 points
Part Number: AWR6843AOP

Hi,

  We are currently running 3D people counting demo. We tried to modify the cfg file to change the detection range, velocity resolution, etc. But errors occurred when we were trying to use commands from mmwave SDK user guide showing "'cfarCfg' is not recognized as a CLI command" and " 'aoafovCfg' is not recognized as a CLI command". The config file runs well on SDK out of box demo, using mmwave demo visualizer. Is that 3D people counting demo does not support new version of cfg file?

Thanks,

Chen