Hi, support team
My customer has the questions as follow:
I am using mmWaveStudio with awr1843boost
I have question about making chirp that I think chirp is analog signal
But I can design adc start time at chirp
There are no information that chirp is analog or digital signal
Thanks so much.
Best regards,
Yuki
Hello Yuki,
A chirp a signal whose frequency increases linearly with time :
Please refer to the following links as well for more details on the concept and programmability of a chirp:
https://www.ti.com/lit/wp/spyy005a/spyy005a.pdf
https://training.ti.com/mmwave-training-series
https://www.ti.com/lit/an/swra553a/swra553a.pdf
Hope this helps. Please let us know if the customer needs further clarification.
Regards,
Ishita
