IWR6843AOPEVM: Overhead detection GUI showing people in an opposite way

Danh Pham

Part Number: IWR6843AOPEVM

Hello,

I am currently running the Overhead3d people counting GUI, with the default aop_low_bw binary and the low_bw config. However, the GUI is showing people above the sensor, not under it, in the room.

Please have a look at this picture to see the problem: https://imgur.com/a/A60X170

Am I misunderstanding something or is the GUI having problems?

Thank you.

Danh P.

over 4 years ago

0 Sudharshan KN over 4 years ago

TI__Genius 10550 points

Hi,

For overhead demo please use the MATLAB based GUI provided in the labs. That should fix the issue.

Regards,

Sudharshan K N

0 Danh Pham over 4 years ago in reply to Sudharshan KN

Intellectual 295 points

Hi,

So what's the point of the overhead detection setting in the Python GUI? Because I already implemented a Python version of the code for the wall mount binary, so I'd prefer Python as the language for overhead as well.

Thanks,

Danh

0 Sudharshan KN over 4 years ago in reply to Danh Pham

TI__Genius 10550 points

Hi,

Ok. Unfortunately you may have to refer to the code in MATLAB for overhead implementation.

Regards,

Sudharshan K N

Sensors

Sensors forum

IWR6843AOPEVM: Overhead detection GUI showing people in an opposite way