AWR6843ISK: awr6843

Paul Congré

Prodigy 40 points

Part Number: AWR6843ISK
Other Parts Discussed in Thread: AWR6843

Hello TI,

I need to use the AWR6843 with an STM32L4. Is it possible to control the sensor with the J3 and J4 connector?

Best regard

P.Congré

over 4 years ago

0 Sabeeh Khan1 over 4 years ago

TI__Mastermind 31010 points

Hi,

The J3 and J4 connectors on the AWR6843 are used for CANbus. You would have to have the STM32 communicate over this CANbus if you would like to use the J3 and J4 connectors. Please see the schematic for more hardware details.

The STM32 could use SPI or UART by connecting over the 60pin connector. Find the design files on this page: https://www.ti.com/tool/AWR6843ISK

Sensors

Sensors forum

AWR6843ISK: awr6843