IWR1843BOOST: How to copy source code of industrial toolbox into project folder?

Murata Tetsuya

Prodigy 120 points

Part Number: IWR1843BOOST

My environment:

Code Composer Studio Version: 9.2.0.00013
Industrial toolbox 4.7.0

I imported sample code "18xx Traffic Monitoring", but there is no source code in project folder.

Please tell me how to copy source code into project folder with CCS.

Best Regards,

over 4 years ago

0 Vaibhav Mahimkar over 4 years ago

TI__Mastermind 23725 points

Hello

Can you please reference the instructions you have followed for performing the import/copy.

Thank you,

Vaibhav

+1 Ken Zhang over 4 years ago

TI__Expert 3405 points

Hi, Murata

You should modify the projectspec files of mss and dss ( 18xx_traffic_monitoring_dss.projectspec and 18xx_traffic_monitoring_mss.projectspec) which configure the project before importing the project.

Search for action="link" and change it to action="copy" in the projectspec files and then import the CCS project.

This should solve the problem.

0 Murata Tetsuya over 4 years ago in reply to Ken Zhang

Prodigy 120 points

Hi, Ken

This solved my problem.

Thank you!

Sensors

Sensors forum

IWR1843BOOST: How to copy source code of industrial toolbox into project folder?