DCA1000EVM: How to output MMWAVEICBOOST and DCA1000 simultaneously when using lab.

Koji Hayashi92

Mastermind 7030 points

Part Number: DCA1000EVM
Other Parts Discussed in Thread: MMWAVEICBOOST, AWR6843ISK

Hi TI-team

I want to output from MMWAVEICBOOST and DCA1000 at the same time.

I read the MMWAVE SDK User Guide and was able to output simultaneously in demo mode.

I would like to know how to output simultaneously when using the lab GUI.

I have AWR6843ISK, MMWAVEICBOOST and DCA1000 connected.

The following URL

Compiler/DCA1000EVM: LVDS stream activation for vital signs - Sensors forum - Sensors - TI E2E support forums

＞You also need to implement the LVDS functions in the Vital Signs lab itself.

Please let me know how to do this specifically.

Best Regards,

Koji Hayashi

over 4 years ago

0 Alec May over 4 years ago

TI__Genius 17265 points

Hi,

As mentioned in the thread you linked, some demos have the LVDS streaming already implemented, while some do not. If you are looking to add LVDS streaming to a lab which currently does not support it, you will want to use the Out Of Box Demo as a comparison point for how to implement it properly.

Best Regards,
Alec

0 Koji Hayashi92 over 4 years ago in reply to Alec May

Mastermind 7030 points

Hi Alec-san

Thank you for response.

I am trying to output UART and DCA1000 simultaneously in the lab of occupancy_plus_vital_signs.

In that case, should I add

1. mmw_lvds_stream.c

2. mmw_lvds_stream.h

to mmwave_automotive_toolbox_3_4_0\labs\incabinsensing\occupancy_plus_vital_signs\src\mss's mss_main.c and mss_main.h respectively?

I would like to know exactly how to do this.

Best Regards,

Koji Hayashi

0 Alec May over 4 years ago in reply to Koji Hayashi92

TI__Genius 17265 points

Hi,

Yes, you will need to add those two files and make the necessary modifications to mss_main.c and mmw_cli.c. You should be able to quickly find the necessary changes by referring to the out of box demo and its implementation.

Best Regards,
Alec