• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 181 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642: Adjust Sampling of each chirp

Ken Zhang
Expert 3535 points
Part Number: AWR1642


Hi， experts

Costumer want to adjust their sampling as the picture shows.

normally, AWR1642 would do the sampling like a1-a128, but customer wants it do the sampling like b1-b128; 

Is this kind of configuration possible?  I am thinking about adjusting ADC start time of each chirp. Do you have any comments on this issue?

  • +1
    TI__Guru**** 150254 points

    Hi,

    It seems that the customer only wants to get one sample for each chirp?

    This is not possible at sampling time.

    It is possible to get all the chirp samples a1-a128 for all chirps and then copy the b1-b128 samples

    thank you

    Cesar