Hi all recently we got lmp91000 EVM along with SPIO-4/NOPB , I would like to interfacing ltalSens IS-C electrode with lmp91000 board but i do not how to configure lmp91000 board,
please check ltalSans IS-C. ItalSens IS-C description.pdf thank you.
Dear Sankar -
Thanks for the post and welcome to E2E!
in the attachment you provided, they describe the reference, working and counter electrodes, but have no illustration which shows which lead is which - I would suggest going back to the folks that supply this cell and request that information, then you should be all set to connect to your EVM.
https://www.palmsens.com/product/italsens-is-c/
I did look over most of their website but could not find any electrical technical information. I did find this thing on there, though - might be really helpful when using those strips and the wires are labeled C, W and R (see image below)
https://www.palmsens.com/product/sensor-connector/
