AWR2243: Continuous Streaming Mode

Gabriel Virbila

Part Number: AWR2243

What is the default frequency or how is it determined for single tone cw mode and am looking at MMWL_ContModeEnable function and utilized functions, rlDeviceSetContStreamingModeConfig and rlEnableContMode.

What does rlDeviceSetContStreamingModeConfig and rlEnableContMode do exactly. It's not entirely clear from the documentation?

Thanks!

over 3 years ago

0 Cesar over 3 years ago

TI__Guru*** 147894 points

Hi,

The commands implemented in the APIs are described in the Radar Interface Control Document provided in the DFP release

MMWAVE-DFP-2G

MMWAVE-DFP Firmware | TI.com

Thank you

Cesar

0 Gabriel Virbila over 3 years ago in reply to Cesar

Prodigy 240 points

Thanks. I was able to piece together some code using the examples located in the DFP.

What is not clear, is what TX is enabled when running in continuous mode?

0 Cesar over 3 years ago in reply to Gabriel Virbila

TI__Guru*** 147894 points

The Tx are enabled through the Channel Config API. The user can enable 1 or more TX

thank you
Cesar

Sensors

Sensors forum

AWR2243: Continuous Streaming Mode