IWR6843: HPF1/2 OFF setting

Takatoshi Tsuji

Expert 1550 points

Part Number: IWR6843

Dear support team,

We would like to measure "range profile for zero doppler" by visualizer without HPF 1/2,

which can be set in profileCfg command. But there is no option for "no HPF".

I am fine if you can advise how to set those parameters.

Best regards,

Taka

0 Ishita Kochar over 3 years ago

Hello Taka,

The HPF1/2 are required and cannot be bypassed. This is the reason you do not find any API/control to bypass the HPF.

I will double check on this and let you know.

Regards,

Ishita

0 Takatoshi Tsuji over 3 years ago in reply to Ishita Kochar

Expert 1550 points

Hello Ishita,

Thank you for your message and I look forward to your reply after double check.

Best regards,

Taka

+1 Ishita Kochar over 3 years ago in reply to Takatoshi Tsuji

Hello Taka,

Yes, This is correct, bypassing HPF1/2 is not allowed. There is no API for this.

Regards,

Ishita

Sensors forum