AWR1642BOOST-ODS: AWR1642BOOST-ODS

Lakshmi Prasad Bandlamudi

Part Number: AWR1642BOOST-ODS

I am getting this error

i see no gel file is located as per below screen

Actually it is expecting xwr16xx_mss_init.gel file . How i can load the mss code using debugger?

I could successfully load dss code but not mss

Regards,

Lakshmiprasad

0 Cesar over 2 years ago

Hi,

Please make sure you create a ccxml file as described in the mmWave SDK UG. I am attaching the one I use.

With this ccxml file I am able to connect both MSS and DSS. If you want to use this file you will have to update the Serial Number.

Thank you

Cesar

I am attaching a sample AWR1642.ccxml

0 Lakshmi Prasad Bandlamudi over 2 years ago

Hello Cesar,

THanks for providing input.

I used your ccxml file and the result is same

I still see mss code was not loaded into AWR board

But i could successfully load dsp code

Regards,

Lakshmiprasad

0 Cesar over 2 years ago in reply to Lakshmi Prasad Bandlamudi

Thank you,

As we discussed, let's make sure that the hw board is working properly.

Please flash the demo binaries and try to run the demo

thank you

Cesar

Sensors forum