• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 250 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

IWR1443BOOST: Which DEMO/Lab can give x,y,z position measurements?

IWR1443BOOST: How to use DEMO visualize measure x,y,z position?

feng tang
Genius 3595 points
Part Number: IWR1443BOOST

Hi,

I down load DEMO visuallize 2.1 and have SDK 2.01.04, I follow the user guide of Visualize, and can not get 3D plots by click "Scene", it does not show "elevation" check box? Do you know why?

Thanks,

  • 0
    TI__Genius 10674 points

    Feng,

    To view a 3D scatter plot in mmWave Demo Visualizer, you first need to load the profile_3d.cfg found at: C:\ti\mmwave_sdk_02_01_00_04\packages\ti\demo\xwr14xx\mmw\profiles

    Then, in the Demo Visualizer, select the "4Rx,3Tx(15 deg + Elevation) Antenna config:

    Then you should be able to view the 3D scatter plot.

    Regards,

    Brennan