TMAG5273EVM: Technical drawing or CAD model or dimension

Danilo A.

Part Number: TMAG5273EVM

Hi Team,

Our customer would like to request for the technical drawing, CAD model or dimension of the TMAG5273EVM evaluation module. I have searched the forum and the product page but didn't find this information. Can you please share a copy?

Regards,

Danilo

over 3 years ago

0 Mekre Mesganaw over 3 years ago

TI__Expert 7625 points

Hi Danilo,

The below picture shows the dimensions of the TMAG5273EVM.

Regards,

Mekre

0 Danilo A. over 3 years ago in reply to Mekre Mesganaw

TI__Mastermind 29435 points

Hi Mekre,

Thank you for providing the dimensions of the evaluation module. Can you please provide also the dimensions of A to I and hole diameter. It seems that the grid dimension is 50 mils but it would be great if you could provide the official dimension.

Regards,

Danilo

0 Mekre Mesganaw over 3 years ago in reply to Danilo A.

TI__Expert 7625 points

Hi Danilo,

The dimensions are below:

A=599mils
B=460 mils
C=F=302 mils
D=G=300 mils
E=H=298 mils
Holes
- Hole diameter=150 mil
- Bottom left point of “B” dimension to center-point of most-left hole is 152 mil in the x direction and 284 mil in the y direction.
- Distance from 1^st left hole to 2^nd left hole=600 mil
- Distance from 2nd^t left hole to 3^rd left hole=300 mil
- Distance from 3^rd left hole to 4^th left hole = 600 mil

Regards,

Mekre

Sensors

Sensors forum

TMAG5273EVM: Technical drawing or CAD model or dimension